对流自组装2维胶体晶体成膜趋势和覆盖率

从自组装理论出发, 分析对流自组装2维胶体晶体中空白、条纹区域出现的机理,并在实验上予以验证。通过研究得知, 2维胶体晶体的自组装过程呈现空白、条纹、大面积单层、双层条纹的趋势。从胶体晶体覆盖率的角度出发研究2维胶体晶体的组装参数与质量之间的关系,结果表明:胶体晶体的总覆盖率与基片提拉速度倒数呈线性正比,和粒子体积分数呈反比例函数关系; 受到多种因素的影响,大面积2维胶体晶体总是伴随着一定比例的空白区域和双层区域出现,提拉法所能获得的最大单层覆盖率为95%。     

无皂高分子纳米胶乳粒子的制备与稳定

在微波辐照下,以过硫酸钾(KPS)为引发剂,丙酮水溶液(质量比1∶ 1)为分散介质,进行了苯乙烯(ST)和其它共聚单体:甲基丙烯酸甲酯(MMA)、甲基丙烯酸丁酯(BMA)、丙烯酸乙酯(EA)及顺丁烯二酸酐(BDA)的无皂乳液聚合,得到了稳定的纳米胶乳粒子.讨论了共聚单体的种类和浓度对粒子水化半径的影响.增加配方中亲水性单体含量,使引发反应中引发剂的消耗量增加,粒子表面电荷密度增大,同时亲水性增加,油水界面张力减小,粒子变得稳定,有利于小粒子的生成.粒子的大小随亲水性单体的含量呈曲线关系,曲线上有最低点.     

THE EXISTENCE OF SOLUTIONS OF QUASILINEAR ELLIPTIC EQUATIONS WITH CHANGE OF SIGN

1 IntroductionIll tllis paper, we co1lsid(tr the fOllowillg elliptic prol)leInwllere n is a bOui1ded regular domai1l in RN(N > 3), N > p > 1, aild a: n - R is a Holdercontinuou8 function which chauges 8ign o11 fl so that the open setsandO-- = {z E Ola(z) < 0}are both nonemPty.We use the standard notations. Let II' lI, denote the norm of L'(o) for s21. DenoteW0lP(fl) the comPletion of C7(fl) under the norm IIuIl = llVuIl;, the norm of tlle dual spaceof WJlp(fl) will be denoted by Il…     

用超临界CO_2制备微孔聚苯乙烯/热致液晶聚合物原位复合材料

微孔聚合物是80年代初发明的一种新型多孔材料,其特征为:泡孔直径1～10 μm,泡孔密度109～1012cells/cm3,相对密度0.05～0.95.具有缺口冲击强度高、韧性高、比强度高、疲劳寿命长、热稳定性高、介电常数低和导热系数低等优异性能.同时,制备微孔聚合物使用无公害、易回收的CO2和N2替代对臭氧层有害的氯氟烃(氟利昂)和易燃的碳氢化合物等作为发泡剂,是一种新型绿色材料[1].在微孔聚合物中使用超临界流体是90年代初提出的新方法[2～4],可缩短加工时间,同时制得泡孔直径更小、泡孔密度更大的微孔材料.目前研究中,对聚合物多相体系的研究报道很少,只有HIPS[5]、PE/iPP[6]和PVC/木纤维复合材料[7]等少数体系的报道,而聚合物多相体系的研究是材料科学的主要研究领域.可以预见,加入少量第二组分的共混物为基体的微孔材料可以达到更为优异的性能.本工作选择聚苯乙烯与热致液晶聚合物的原位复合材料为研究对象,采用超临界CO2快速降压法[3]制备微孔材料.在前期工作中,报道了该材料是一种综合了液晶聚合物的高强度和聚苯乙烯微孔材料轻质、高抗冲、保温隔音性能的具有仿生结构的新型复合材料[8].本文在此基础上,进一步研究热致液晶聚合物的加入对微孔结构的影响以及界面相容剂在微孔成型中的作用.     

复合驱注采液中活性剂PS浓度的高效液相色谱分析方法研究

 合成了强阴离子交换及硅胶基质ODS键合高效液相色谱 (HPLC)柱填料。针对胜利油田复合 (碱 +表面活性剂 +聚合物 )驱油工程实施的需要 ,建立了适合于注采液中表面活性剂PS的HPLC分析方法。该方法对PS标准样品的最小检出限为 0 .4mg/L ,线性范围为 5 0mg/L～ 10 0 0mg/L ,回收率为 95 .7%～ 99.8%。实践证明 ,该方法的建立为油田的复合驱油配方设计、注入方案调整、产品质量监控及驱油机理研究等提供了有力的技术支持。     

单分散交联聚（4—乙烯吡啶／丙烯酸丁酯）无皂正电性共聚乳胶

以偶氮二异丙基脒盐酸盐（V50)为引发剂,采用4－乙烯吡啶（4－VP）／丙烯酸丁酯（BA）为混合单体,分别以二乙烯苯（DVB）或双甲基丙烯酸乙二醇酯（EGDMA）为交联剂,用无皂乳液聚合的方法合成了一系列正电性共聚乳液,并用扫描电镜（SEM）、Zeta电位测定仪详细研究了单体配比、交联剂种类和交联度对粒径大小及其分布、粒子形态和乳液电性能的影响,并探讨了该三元无皂乳液聚合的成核机理。结果表明：4VP／BA的无皂乳液聚合遵循均相成核机理。当BA含量低或者微球交联度较小时,高分子亲水性强,临界链长度大,生成粒子数目少,所以粒径大;随着BA含量的增加或者交联度的增大,高分子疏水性增强,临界链长度沽小,生成粒子数目增多,粒径变小,当BA／4VP＝1／4（g/g)时,得到单分散共聚乳胶,少量BA与4VP共聚可以明显提高乳液的稳定性。     

Hollow‐particle latexes: Preparation and properties

Hollow‐particle latexes were prepared according to the following stages: (1) the preparation of the methyl methacrylate–methacrylic acid (MAA)–ethylene glycol dimethacrylate copolymer ( I ) latex, (2) the preparation of a shell ( II ) based on polystyrene or styrene–acrylonitrile–divinyl benzene copolymer polymerized onto copolymer ( I ) particles, and (3) the neutralization of the core ( I ) carboxyl groups with a base (NH₄OH or NaOH) at temperatures close to the glass‐transition temperature of the polymer ( II ). The neutralization resulted in the expansion of the particles and formed water‐filled hollow particles. The microspheres had an overall diameter of 460–650 nm and a hollow diameter of 300–450 nm. Rheological studies and particle size measurements by transmission electron microscopy and dynamic light scattering of the copolymer ( I ) latex indicate that the maximum particle swelling occurred at an approximately equimolar MAA/base ratio. It was found that even without the neutralization of the MAA units, a small hollow formation in the latex particles occurred during stage 2 because one volume of the copolymer ( I ) retained about 8 volume parts of water. It was also discovered that the final hollow‐particle geometry after neutralization depends on the shell copolymer thickness and type as well as on the conditions during stage 3, that is, the time, temperature, base type, and concentration. The opacifying ability of the synthesized hollow particles was investigated in latex coatings. The opacifying ability values were generally in agreement with the hollow‐particle geometry. The only exception was related to the copolymer ( I )/copolymer ( II ) ratio. The maximum hollow volume was obtained at this value equal to 1/8, whereas the highest opacifying ability was observed at 1/10. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1435–1449, 2001     

Adhesive and mechanical properties of soft nanocomposites: Model studies with blended latex films

We used a unique approach based on contact mechanics to quantify the adhesive and linear viscoelastic properties of latex films approximately 100 μm thick. The latex films were formed from a mixture of two particle types and form stable films consisting of rigid and compliant regions. We used atomic force microscopy to verify that these regions remained well dispersed on the length scale of the original particle size. The properties of the films were determined by ?_h, the volume fraction of the stiffer component. For ?_h < 0.45, the films were quite adhesive, with viscoelastic properties determined by the compliant matrix material. Adhesive interactions between the film and indenter enabled us to oscillate the indenter in the direction normal to the film surface while maintaining a constant contact area, allowing us to determine the frequency dependence of the dynamic moduli of the films. Stiffer films with higher volume fractions of hard particles were characterized by indentation measurements, from which we were able to determine the time dependence of the relaxation modulus of the latex films. All results were consistent with a power‐law form of the relaxation modulus with an exponent of 0.25. The magnitude of the relaxation modulus increased by a factor of 3000 as the volume fraction of hard particles increased from 0 to 0.89. For low values of ?_h, the composition dependence of the film stiffness was similar to the concentration dependence of the viscosity of spherical particle suspensions. A much weaker concentration dependence was observed for the highest values of ?_h, where the properties of the films were dominated by the stiffer component. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3090–3102, 2001     

高含氢聚甲基硅氧烷改性聚丙烯酸酯乳液的结构与涂层性能

高含氢聚甲基硅氧烷改性聚丙烯酸酯乳液的结构与涂层性能;高含氢聚甲基硅氧烷; 改性聚丙烯酸酯乳液; 核壳型共聚乳胶; 涂层剂     

Simulation of Styrene Polymerization by Monomolecular and Bimolecular Nitroxide‐Mediated Radical Processes over a Range of Reaction Conditions

Simulations of polymerization rate, molecular weight development and evolution of the concentrations of species participating in the reaction mechanism over a range of operating conditions, and a parameter sensitivity analysis showing the effects of temperature, activation/deactivation equilibrium constant and initial concentrations of controller and initiator (if present) on these variables are presented for the nitroxide‐mediated radical polymerization of styrene. The simulations were performed with a computer program based on a detailed reaction mechanism. The simulated profiles of conversion, number average molecular weight ( ), and polydispersity agree well with experimental data. Previously unknown activation energies for reactions involved in the mechanism are estimated. The temperature dependence of the kinetic rate constants obtained in this study will be useful for future modeling and optimization studies.